Datalogic-scanning Matrix 400 Bedienungsanleitung PDF herunterladen (Seite 96)

MATRIX 400™ REFERENCE MANUAL

6.3 ID-NET™

The ID-NET™ connection is used to collect data from several readers to build a multi-point or

a multi-sided reading system; there can be one master and up to 31 slaves connected

together.

The slave readers are connected together using the ID-NET™ interface. Every slave reader

must have an ID-NET™ address in the range 1-31.

The master reader is also connected to the Host on the RS232/RS485 main serial interface.

For a Master/Slave Synchronized layout the External Trigger signal is unique to the system;

there is a single reading phase and a single message from the master reader to the Host

computer. It is not necessary to bring the External Trigger signal to all the readers.

In the Master/Slave Synchronized layout the Master operating mode can only be set to

Phase Mode

The main, auxiliary, and ID-NET™ interfaces are connected as shown in the figure below.

Figure 104 – ID-NET™ M/S Synchronized Layout

 Main Serial Interface (RS232 or RS485)

 External Trigger

 ID-NET™ (up to 16 devices - practical limit)

Host

1 3

Master

Slave#1 Slave#n

Power

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 141 142

Keine Kommentare

Datalogic-scanning Matrix 400 Bedienungsanleitung Seite 96